The internal texture of the aluminum wall panels interior is unique, the color is rich and durable, and the appearance shape can be selected, and it is perfectly combined with the glass curtain wall material and the stone curtain wall material. Its perfect appearance and excellent quality make it popular with owners. Its light weight, one-fifth of the only marble, is the excess of the glass curtain wall, which greatly reduces the load on the building structure and foundation, and the maintenance cost is low. The price ratio is high.
In general, most of aluminum wall panels interior are composite aluminum plates and aluminum alloy single plates.
he treatment process of aluminum wall panels interior can be divided into two methods, one is anodizing and the other is electrostatic spraying. The anodized oxide film is generally above 12μ, and the color is only two kinds of bronze and white. The color is monotonous. The more serious disadvantage is that the color of each aluminum plate surface is different. Many curtain wall panels are combined to form an overall curtain wall effect. Very ugly. This shortcoming can be said to be impossible to eliminate. It is not caused by the production technology, but because the aluminum plate is not made of batch numbers, and there are small differences in chemical composition. In addition, factors such as the current density of the electrolyte during oxidation cannot be completely the same. The color after oxidation is somewhat different. It may not be obvious from a single sheet, but it is very obvious if they are all arranged together. Therefore, the surface treatment of the aluminum plate of the aluminum plate curtain wall must not be anodized. Another method of surface treatment for aluminum wall panels interior is electrostatic spraying. Spraying is divided into powder spraying and liquid spraying. Powder spraying materials are mainly: polyurethane, swelling resin, epoxy resin and other raw materials are matched with high color retention pigments, and dozens of different colors of spraying powder can be obtained. The sprayed powder is resistant to collision and abrasion. Under 50 kg impact, the aluminum plate is deformed, the sprayed layer has no cracks, no layer drop, and is intact and resistant to dilute acid and mortar. The only drawback is that it is afraid of long-term exposure to ultraviolet rays, and it is easy to produce differences in the color of the yin and yang after a few years. The spraying powder produced by many domestic manufacturers has a great difference in weight. Some powders containing gold chips after hanging on the wall change with the angle of the sun, and the color of the wall varies during the day and dusk. The use of powder spray paint hopes to attract attention. Chalco Aluminum can provide electrostatic spray aluminum wall panels interior and anodized aluminum wall panels interior to meet the needs of various indoor and outdoor curtain wall panels. Customers from all over the world are welcome to consult and negotiate.